Aluminum boat for boating in Overijssel

Are you looking for an aluminium boat for boating in Overijssel? Based in Drachten, Haverdesign designs and builds custom aluminium boats for a wide range of applications.

From an aluminium fishing boat for the larger lakes around Giethoorn and Steenwijk to a tender for recreational boating or a fully custom-made vessel for the waters of Overijssel: the desired use forms the starting point for the design.

From the initial idea and 3D design to the technical elaboration and actual realization in aluminum.

From idea to 3D. From 3D to aluminium.

Custom aluminum boat for the waters of Overijssel

Overijssel has many different types of waterways.

Around Steenwijk, Giethoorn, and Weerribben-Wieden National Park, you will find an extensive network of lakes, ponds, canals, and smaller waterways. The Beulakerwijde and Belterwijde offer very different waters than, for example, the IJssel, the Zwarte Water, or the Overijssel Vecht.

A boat for quiet recreational cruising does not automatically require the same characteristics as an aluminum fishing boat, tender, or workboat.

Therefore, Haverdesign can develop a boat from the initial design around actual use.

Dimensions, hull shape, layout, console, seating, storage space, engine, and appearance can all be part of the custom design.

Aluminum boat for boating around Steenwijk and Giethoorn

Steenwijk and Giethoorn are situated in a water-rich part of Overijssel.

The area around Giethoorn and Weerribben-Wieden consists of a combination of ponds, lakes, canals, and smaller waterways.

For an aluminium boat used in this area, dimensions, draft, layout, and engine configuration, for example, can be important design choices.

At Haverdesign, a custom boat does not have to start with an existing standard model.

It can start with what you want to do with the boat.

Based on those requirements, the design is developed digitally in 3D and subsequently technically elaborated for production.

Aluminum fishing boat for Overijssel

Overijssel offers diverse opportunities for sport fishermen.

An aluminium fishing boat can, for example, be used on the Beulakerwijde, Belterwijde, the Zwarte Water, the IJssel, the Overijsselse Vecht, and other waters in the province.

For a custom-built fishing boat, free deck space, casting decks, rod storage, seating, console, electronics, battery compartment, storage space, and the desired engine can be taken into account.

The layout is first developed digitally in 3D.

This way, important choices can be made before the aluminium is cut and the actual construction begins.

Aluminum fishing boat for the Beulakerwijde and Belterwijde

The Beulakerwijde and Belterwijde form large open bodies of water in the water-rich area around Giethoorn and Weerribben-Wieden.

For a fishing boat that is regularly used on larger waters, different features may be important than for a compact boat for smaller waterways and canals.

Especially with a fully custom design, the intended use can be taken into account from the outset.

Don't choose a standard boat first and then try to make it fit.

The boat is being developed around its use.

Aluminum tender for boating in Overijssel

An aluminium tender can also be fully custom-developed for recreational use in Overijssel.

Think, for example, of boating around Giethoorn, the lakes of Northwest Overijssel, or other recreational boating areas in the province.

A tender can be designed with its own hull shape, layout, and appearance.

Seating, console, storage space, engine, and other components can be tailored to the client's wishes from the initial design.

At Haverdesign, custom really means custom.

Aluminum sloop for Giethoorn and Weerribben-Wieden

An aluminium sloop or other recreational vessel can also be developed for quiet recreational boating.

In an area with smaller waterways, different characteristics may be desirable than on large, open water.

A custom design can therefore be focused, for example, on a practical layout, comfortable seating, storage space, and an engine configuration that suits the intended use.

Design and functionality are developed together from the first 3D design.

Aluminum boat for the IJssel

The IJssel forms a very different type of waterway than the lakes and smaller waterways around Giethoorn and Steenwijk.

When an aluminium boat is intended for use on rivers or larger waterways, this can be taken into account during the design.

The sailing area is therefore one of the components that can be discussed in a fully custom project.

The boat is designed not only around how it should look, but especially around what it must ultimately be able to do.

Aluminum boat for the Black Water

The Zwarte Water also forms an important boating area in Overijssel and is connected to various other waterways.

A boat used on a combination of rivers, lakes, and canals may entail different requirements than a boat for one specific cruising area.

With a new design, these operating conditions can be taken into account from the start.

Aluminum workboat for use in Overijssel

In addition to recreational boats, tenders, and fishing boats, Haverdesign can also develop aluminum workboats.

For a workboat, features such as free deck space, stability, accessibility, loading capabilities, and specific equipment can be more important than luxury or recreational amenities.

The starting point is what the boat must ultimately be able to do.

A completely new design can be developed from that application.

Aluminium hull for self-completion

Do you want to take care of the further finishing of the boat yourself?

In that case, a fully welded aluminum hull could be a possibility.

Haverdesign can take care of the design and aluminum construction, after which you can, for example, handle the motorization, electrical installation, controls, interior, or further equipment yourself.

The precise scope of delivery is agreed upon in advance per project.

Designing an aluminium boat in 3D first

A new Haverdesign design starts digitally in 3D.

This allows the shape, proportions, dimensions, layout, and construction to be developed before the aluminium is actually cut.

This allows changes to be assessed during the design process.

After the design phase, the digital model can be technically further developed into production drawings, CNC cutting files, and actual production.

The designer builds. The builder designs.

Haverdesign is run by a single designer and builder.

The same person who develops the boat digitally in 3D also stands in the workshop himself to actually realize designs in aluminum.

As a result, construction, material usage, welding, assembly, and practical manufacturability are already taken into account during the design phase.

No handover between different design and production departments, but one clear line from the initial idea to actual realization.

One designer. One builder.

Marine-grade aluminium is used for the ship structures, including aluminium 5083.

This material is widely used in shipbuilding due to the combination of strength, relatively low weight, weldability, and resistance to corrosion in maritime conditions.

Material selection, sheet thicknesses, and construction are tailored to the specific design and application.

Build kits and CNC cutting files

Not every Haverdesign project needs to be delivered as a fully built boat.

For selected designs, build kits, cutting packages, or digital production files may also be available.

Depending on the package, DXF files, CNC cutting files, production drawings, and additional construction information can be supplied, among other things.

This may be of interest to experienced homebuilders and professional boat builders who have the necessary production capabilities themselves.

From Drachten to the waters of Overijssel

Haverdesign is based in Drachten, Friesland.

From Drachten, aluminium boats are designed and built for clients from Overijssel and the rest of the Netherlands.

Whether you want to sail around Steenwijk and Giethoorn, on the Beulakerwijde, Belterwijde, the Zwarte Water, the IJssel, the Overijssel Vecht, or another boating area: the desired use can be taken into account from the very first design.

How much does a custom-made aluminum boat cost?

The price of a custom-made aluminium boat depends on, among other things, dimensions, design complexity, materials used, engine, finish, and desired equipment.

For example, an aluminium hull for self-completion has a different price structure than a fully equipped fishing boat or tender.

Therefore, with custom work, the first thing we look at is what you want to do with the boat and which version suits that.

Aluminum boat for the waters of Overijssel?

Do you have an idea for an aluminium boat that you want to use in Overijssel?

From a fishing boat for the lakes around Giethoorn to a tender, workboat, hull, or a completely new custom design.

Based in Drachten, Haverdesign can handle the entire process from the initial idea and 3D design to the actual realization in aluminium.

The designer builds. The builder designs.

From idea to 3D. From 3D to aluminium.